Why Can’t I Reach IP 192.168.3.1?
Are you trying to connect to the IP address 192.168.3.1 but are failing to do so? Well, this is one of the common issues that users get stuck while accessing their devices. But there are a few instant fixes that work well in resolving the matter. Do you wish to learn about them? Reading this post till the end will walk you through all of the best possible solutions that will help you log in to your router by eliminating all the hindrances.
Fixed: IP Address Can’t Be Reached
There can be a variety of reasons that can be responsible for IP address issues. Some of the most common ones along with their solutions are listed below:
Reason 1: You are Using the Wrong IP address
Fix 1: Check IP
Not all routers have the same IP address. You should check the label on the router to know what its IP address is. You can also use Command Prompt to know the IP address assigned to your router.
- Open Command Prompt by typing cmd in the Windows search bar.
- Type ipconfig and press enter.
- Different IP addresses will be displayed.
- The one displayed next to the Default Gateway option is your router’s IP address.
Use this IP address to log in to your router.
Reason2: The Router’s Connections are Not Stable
Fix 2: Check the Connections
Examine the connections to the router. All the cables and wires have to be securely connected to their respective ports.
We suggest you replace any damaged cable right away. The connection between the router and the modem should be well intact.
You should also verify the electricity supply to the router. Check the power cable and the socket.
Reason 3: The Device is Not Connected to the Local Network
Fix 3: Connect to the Local Network
The computer that you are using to reach 192.168.3.1 must be connected to the router’s network to log in to the router’s admin panel. Check the same. If you are not connected to the router’s WiFi, then you know why you can not reach IP. Try accessing the IP address after connecting to the local network.
Reason 4: Internet Browser is Not Supported
Fix 4: Use Alternate Browser
Perhaps the browser that you are using is not compatible. You should try using different browsers now. If you are using Google Chrome then use Mozilla Firefox or Internet Explorer and see if you can access the admin panel using the IP address.
We also recommend you update the browser to the latest version as older browser versions may also be the reason why you are facing the login issue.
Reason 5: VPN is Stopping the Process
Fix 5: Disable VPN
You should disable any VPN server if enabled on your computer or laptop. VPN might be blocking the router login. So, disable it first and then try to access the IP address.
Reason 6: Firewall Settings are Blocking the IP
Fix 6: Modify Firewall Settings
Firewall settings may be the reason why you can not log in to your router. Go to the Privacy & Security Settings on your computer and disable the firewall temporarily. Once you have reached the admin page and made the desired changes to your router, you can enable Firewall.
Still Not Working? Try This!
1. Power Cycle Network
If the IP 192.168.3.1 address still can’t be reached, then you need to power cycle the network. This will include the router and the modem. So, power down the router and the modem. Unplug their power cables. Also, disconnect every other cable that is connected to these devices. Give the devices some rest now. After a while, begin by connecting the cables. Next, plug in the power adapters. Use the power buttons to turn the devices on.
2. Reset the Router
Even after trying all the hacks given in this above section, if you can not connect to the IP address, then reset your router to its default values. Reset the router by using the Factory Reset button located on it. To learn about the process, refer to the user manual of the router.
The Final Note
Right after resetting your router, set it up once again from scratch. The setup instructions will also be available in the user guide of the router. Refer to that. You should no longer be troubled by the IP 192.168.3.1 not reachable issue now.