192.168.4.1 IP Address

All devices in the internet world work through IP. 192.168.4.1 is among them. Settings that can be modified or altered via this Internet protocol address are – SSID (WiFi name), encryption key (WiFi password), admin details, security or encryption protocols, and other admin operations.

(Steps) How to Log in to 192.168.4.1

This login address works with Zoom and Zyxel WiFi routers. The steps to login via http://192.168.4.1 are:

• Join the network of your router on a computer.
• Load an internet browser.
• Into the address bar, you need to enter the 192.168.4.1 IP.
• Type the router’s username and password and select Login.
• You will get successfully logged in to your home network router’s settings.

Note: It is not necessary that your router or gateway works with the http://192.168.4.1 login address. Before using the above-given steps, we recommend you verify the IP address of your home network router.

Login Information for 192.168.4.1

After pressing Enter after the IP entry, the login page asked for the username and password. Below, we have mentioned the most used admin details. Thus, if you have lost the router’s product manual, you can give the following usernames and passwords a try:

Username Password	admin admin
Username Password	admin password
Username Password	admin –
Username Password	admin 1234
Username Password	admin

Know that the admin details must be entered in lowercase only. They are case-sensitive. Just in case you want to be extra cautious, you are advised to disable the Caps Lock key.

192.168.4.1 Refused to Connect: Solutions

Stances can show up when the 192.168.4.1 refuses to work or connect to the internet. In that case, you need to pay attention to a few things and perform troubleshooting as mentioned below:

• Verify Connection: The IP address won’t work if you don’t have an active internet connection. Thus, you need to verify that your router is properly connected to the modem. And above that, the cable joining the router and modem is supposed to be free of wear and tear.
• Invalid IP Address: Not all routers run on 192.168.4.1 IP. Some of them work with 192.168.10.1 IP too. In that scenario, you must use the second IP address. However, if you are sure about the IP you’ve used, ensure that you’ve entered it without syntax errors. Do not forget to check the location of IP entrée. It must be the URL bar of your browser.
• Disable Firewall for a Moment: Firewalls are good for PC and home networks until they halt access to the software management page of a router or other gateway. To access the router login IP successfully, you need to disable firewalls on your PC for the time being. Also, disable ad-blockers on the web browser.

Reboot the Router
It can be a technical glitch that is causing a temporary connection loss with the IP address. You must switch off the router for a while and then switch it on again to visit http://192.168.4.1 successfully.

How to Change WiFi Password and SSID with IP?

You very well know that the network settings (SSID and WiFi password) of the router can be changed through the IP address. If you are looking for instructions explaining the same process; you can read the below points:

• Complete the WiFi router login process via 192.168.4.1.
• You are required to select the Settings tab.
• Hit Wireless.
• In some routers, you will find the option labeled “Wi-Fi Settings”.
• In a moment, you will cross paths with a page showing the WiFi settings of your home router.
• Here, you must type the WiFi name you want to assign to your router into the Network Name (SSID) field.
• Can you see the field named “WiFi Password or Pre-shared Key”?
• If yes, then input the password that you wish your router’s network to possess.
• Hit the option that allows you to save these settings.

Quick Tip: Do you own a router that supports 5GHz frequency as well? You have to create separate SSID and password for the same frequency band in that case.

Still 192.168.4.1 Login Not Working?

Perhaps, you were not careful during the IP login process due to which you are facing errors. To resolve the error, we suggest you check the network you have connected your computer to. It must belong to the router for which you are using the IP. Otherwise, follow the given below techniques:

• The http://192.168.4.1 login address must be entered into the address field only.
• Restart your PC and switch the connection source between router and computer (wireless to wired or vice-versa).
• Ensure that you are not using two sources of connection between your devices plus the web browser must not be outdated.

What You Should Do After Accessing Login IP?

Once you visit the login IP without any hassle, you must refer to the table given above to input the username and password of the router. You have to ensure that the login details are entered correctly. Else, you will have to repeat the 192.168.4.1 login process again.